Amprius Technologies (AMPX), a leader in battery technology, has reported significant growth in its first quarter of 2024, with a marked increase in customer numbers and a substantial rise in revenue. The company has doubled its customer base, now shipping to 82 customers, and introduced a new cycle product family, enhancing their Silicon nanowire platform.
Financially, Amprius achieved a 397% increase in total revenue year-over-year, amounting to $2.3 million for the quarter. Despite a negative gross margin of 190%, the company has made strides in its production capabilities and anticipates reaching two megawatt hours of production by year-end. Amprius is also advancing in the construction of its large-scale manufacturing facility in Brighton, Colorado, and has raised $2.1 million through share sales, with plans to secure additional funding.
Key Takeaways
- Amprius Technologies reported a 397% increase in total revenue, with $2.3 million for the quarter.
- The number of customers doubled to 82, with significant interest in both SiCore and SiMaxx products.
- The company is expanding its production capacity, expecting to achieve two megawatt hours by year-end.
- Amprius is progressing on its large-scale manufacturing facility in Colorado, with full construction drawings expected by the end of the summer.
- The company has a negative gross margin but expects improvement as production capacity expands.
- Amprius finished the quarter with $39 million in cash and no debt, and is seeking additional funding through equity issuances and non-dilutive sources.
Company Outlook
- Amprius is focused on scaling up manufacturing to meet the growing demand for their batteries.
- The company is on track to deliver expanded production capacities and is looking forward to the construction of their gigawatt-scale facility in Colorado.
- They are confident in their growth opportunities in the aviation, conformal wearable battery, and EV battery markets.
Bearish Highlights
- The company reported a negative gross margin of 190% for the quarter.
- Operating expenses were reported at $5.9 million, and the company’s net loss for the quarter was $9.9 million.
Bullish Highlights
- Amprius has received industry recognition, including being named the CleanTech Battery Company of the Year.
- The company’s silicon anode technology is performing well, with over 800 customer orders received.
- Strategic partnerships and tolling arrangements with manufacturers are increasing customer interest.
Misses
- Despite revenue growth, the company is still experiencing negative gross margins.
- Additional funding is required, prompting the company to spend $1 million to $2 million on equipment and seek further capital.
Q&A Highlights
- CEO Kang Sun discussed the strong interest in their SiCore product and the large production capacity driving customer inquiries.
- The company clarified that customers are still highly interested in SiMaxx, with no easy switch to SiCore despite its availability.
- Amprius will provide a cost estimate and schedule guidance for their Colorado factory by the end of Q3 2021.
- Sales in Q1 2021 were roughly split between SiMaxx and SiCore, with $1 million from SiMaxx and $1.3 million from SiCore.
InvestingPro Insights
Amprius Technologies (AMPX) has shown a dynamic start to the year with a remarkable increase in revenue and customer base. To provide a deeper financial perspective, here are some InvestingPro insights that could help investors understand the company’s current market position and future prospects.
InvestingPro Data indicates that Amprius has a market capitalization of $209.55 million and has experienced a substantial 105.33% revenue growth in the last twelve months as of Q4 2023. Despite this, the company’s gross profit margin stands at a negative -162.11%, reflecting the challenges in achieving profitability amidst rapid expansion.
An InvestingPro Tip highlights that analysts are optimistic about sales growth in the current year, which aligns with the company’s reported revenue increase and customer acquisition. However, it’s worth noting that Amprius is quickly burning through cash, which is a point of concern for investors considering the company’s significant capital expenditures and negative gross profit margins.
Investors should also be aware that, according to another InvestingPro Tip, the company is not expected to be profitable this year. This is corroborated by a negative P/E ratio of -6.21, indicating that the market is pricing in the company’s current lack of earnings.
Despite the challenges, Amprius has a strong cash position, holding more cash than debt on its balance sheet, which could provide some financial flexibility as it continues to scale operations.
For investors seeking a more comprehensive analysis and additional tips on Amprius Technologies, there are 13 more InvestingPro Tips available at https://www.investing.com/pro/AMPX. To access these insights and make more informed investment decisions, use the coupon code PRONEWS24 to get an additional 10% off a yearly or biyearly Pro and Pro+ subscription.
Full transcript – Amprius Tech (AMPX) Q1 2024:
Operator: Good afternoon. Welcome to Amprius Technologies’ First Quarter 2024 Earnings Conference Call. Joining us for today’s presentation are the company’s CEO, Dr. Kang Sun; and CFO, Sandra Wallach. At this time, all participants are in listen-only mode. Following managements remarks, we will open the call for questions. Please note that this presentation contains forward-looking statements, including, but not limited to, statements regarding future product commercialization, new customer adoption, and the timing and ability of Amprius to build its large scale manufacturing facility, expand its manufacturing capacity, scale of business and achieve a sustainable cost structure. These statements involve known and unknown risks, uncertainties and other important factors that may cause Amprius’ results, performance or achievements to be materially different from any future results, performance or achievements expressed or implied in such forward-looking statements. For a more complete discussion of these risks and uncertainties, please refer to Amprius’ filings with the Securities and Exchange Commission. Finally, I would like to remind everyone that this call is being webcast and a recording will be made available for replay on the company’s Investor Relations website at ir.amprius.com. In addition to the webcast, the company has posted a shareholder letter that accompanies these results, which can also be found on the Investor Relations website. I will now turn the call over to Amprius Technologies, CEO, Dr. Kang Sun, for his comments. Sir, please proceed.
Kang Sun: Welcome, everyone, and thank you for joining us this afternoon. On today’s call, I will report our accomplishments from the first quarter. We are also highlighting some of the upcoming milestones, we are expecting for this year. Our CFO, Sandra Wallach, will then discuss our financial results for the period. After that, I will share some closing remarks before opening the call for questions. Before I give a recap of the quarter, I would like to briefly introduce Amprius to those who may be new to the company. As a reminder, here at Amprius, we develop, manufacture and market high-energy density and high-power density batteries with applications across all segments of the electric mobility, including the aviation and the EV industries. Across our battery portfolio, we offer unmatched performance, including batteries capable of specific energy density of 450 watt-hour per kilo, and the metric energy density of 11.50 watt-hour per liter. 10C power capability, the extreme fast charge rates of 0% to 80% scale of the charge in approximately six minutes. The ability to offer it in a wide temperature range of minus 30 degrees Celsius up to 55 degrees Celsius. And the safety design features that enable us to pass the United States military benchmark, new penetration test. Late last year, we achieved a third-party validation of our latest 500 watt-hour per kilo, 1,300 watt-hour per liter battery platform, which we expect will be ready for commercial shipments later in 2024. Each of these performance parameters is critically important to electric mobility applications. Not only do our batteries enable certain aircraft and the vehicles to function, but it enable our customers to achieve their economic targets as well. It’s our belief that there are no other commercial batteries on the market that can perform at this levels today. Amprius is the silicone anode batteries pioneer with over a decade of the development experience, a strong patent portfolio of over 80 issued patents and patent applications and the long-track record of commercial statements and the customer success. Turning now to a review of our first quarter. To start 2024, in addition to driving industry-leading performance with our battery technology, we took a critical step to drive our scale-up effort and increase our output to meet the growing demand for our solutions. In January, as a part of this continued push to make our product available to the electric mobility space, we launched our all new cycle product family to go along with our existing Silicon nanowire platform, now called SiMaxx. Complementary to SiMaxx, which is Amprius’s highest energy density performance battery offering, the cycle platform services applications that demand both high energy density and longer cycle life, offering up to 400 watt-hour per kilo and as many as 1,200 cycles at the full depth of discharge. The cycle product family also has additional form factor flexibility, capable for both pouch and cylindrical sale form factors. This enables utilization across a broader range of applications, such as e-bike and other micro mobility market segments. In addition to having another product platform available for Amprius customers, introduction of cycle battery accelerates our revenue growth without additional capital investment and serve our customers without delay. To produce cycle batteries, we take advantage of existing available lithium-ion battery production capacity in the industry and have toll manufacturers as a bridge between now and the operation of our own large scale manufacturing facility. These toll manufacturing agreements provide us with 100 megawatt hours of cycle capacity today. Overall, SiMaxx and SiCore are the combination of years of work in silicon anode stace and are just the beginning of our vision here at Amprius amps to transform electrical mobility. We look forward to manufacturing both SiMaxx and SiCore at our Brighton, Colorado facility in the future. So far, 2024 has been a huge success commercially for Amprius. In Q1, we doubled the number of customers we shipped to over Q4 2023, shipping to 82 customers, up from 41, 52 of these shipments were to new customers across the electrical comparability sector, complementing our strong repeat customer base that includes Alto Airbus, Teledyne Clear, the US Army, Kraus Hamdani and BAE Systems (LON:). The cycle platform and the manufacturing capacity is a primary driver of our ability to meet this market demand. In the first quarter, we shipped cycle products to 76 customers. As we further build out our book of customer for cycle, we are confident that we will be able to continue to meet the strong demand for our batteries where our SiMaxx production approaches large-scale capacity. As customer demand for Amprius battery is accelerating, expanding production capacity is our priority. In Q1, we continued to make a significant progress inventing our production in Fremont, California. Also recently, we completed the qualification process for our central therm machine, which is used in the silicon and fabrication process. We remain on track to achieve two megawatt hour production in three months by end of the year. We are also implementing SiMaxx production in-house to streamline our manufacturing process. We plan to have this capacity up and running in Fremont later this year. We have continued to make important progress to our largest scale manufacturing site in Brighton, Colorado as well. We currently have completed 30% of construction, design, drawings and specifications for the facility and have taken several regulatory steps for including submitting our site plan and advancing all other regulatory plans and applications for the facility. As an additional step and in response to the market’s strong reaction to our SiCore platform, we have updated our plans for the Brighton facility to redesign our initial production line to the cycle focus. We will continue to produce SiMaxx out of Fremont until a second line begins production. Looking ahead, we have already carried our momentum from the beginning of the year into the second quarter across several of our initiatives. First, we recently signed our first long-term manufacturing agreement with one of our tool manufacturing partners to confirm our collaboration and strategic alignment. This new agreement establish its overall engagement and move us from operating transitionally to a partnership in framework. Second, we have extended our partnership with several customers, including multiple purchase orders from Alto Airbus for our SiMaxx 450 watt-hour per kilo transmission. They continue to use the sales in their project life with SiMaxx supplying the necessary power and endurance for their starter fly operation. We have also received the first production order for the U.S. army, and we expect to deliver them later this year. This is the first order we have received after success completion of the development contract that we discussed during our last call. Third, we have signed several new strategic partnerships in the second quarter, most notably with AIBOT and STAFL Systems. Amprius will soon provide SiCore Cellls to both partners, ensuring maximum power and reliability for AIBOT’s mission-critical operation and serving as a STAFL Systems preferred battery cell supplier. We look forward to partnering with both teams as they work on shaping the future of electric mobility. I believe that these collaborations can provide Amprius with increase in sales, expanding market reach and a greater market share in the high-performance battery market segment. Together, these high-profile customers and the strategic partnerships have helped strengthened Amprius traction in our industry. Just a few weeks ago, in response to the growing global awareness our battery, Amprius host its first Taiwan Battery Forum. Over 100 attendees from the industry-leading companies and institutions learned about Amprius breakthrough about operating technologies and partnership opportunities. Also in April, Amprius was honored with Inaugural CleanTech Battery Company of the Year award by the market intelligence and the research group Tech Breakthrough. This comes on the heels of the Amprius nomination to the Fast charges annual list of the world’s most innovative companies, another point of recognition for our business. While we have long known that our products are yet to be matched at the commercial level, we are proud that the industry is taking notice as well. It’s clear that our recent customer expansion and the new industrial recognition signaled a strong start to 2024 for Amprius. We are working hard to expand our production capacity to meet our sizable demand, and we are confident in the path forward for Amprius. With that, we will turn the call over to our CFO, Sandra Wallac to review our financial results for the quarter. Sandra?
Sandra Wallach: Thank you, Kang. I would now like to spend a few minutes covering some key financial updates. As a reminder, our detailed financials can be found in our shareholder letter. We finished the first quarter with $2.3 million in total revenue. As we previously discussed, our total revenue is the combination of two main revenue streams: product revenue and development services and grant revenue. This quarter, all $2.3 million of our revenue came from our product revenue, representing a 397% increase from the prior year period and 147% sequential increase. These increases were largely driven by shipments to 82 customers in the quarter, a significant increase for Amprius. Although our product revenue remains largely driven by customer purchase orders that can arrive at uneven times throughout the year, we have shown consistent new customer growth and diversification in recent quarters. Also of these customers, only three customers represented greater than 10% of revenue, a testament to our diverse customer set. As we’ve discussed in prior quarters, our development services revenue comes largely from large development programs that are non-recurring in nature. Moving to our profitability metrics. Our gross margin was negative 190% for the quarter compared to negative 518% in the prior year period and negative 98% in Q4 of 2023. As a reminder, we see significant gross margin variation as our product and services revenue mix fluctuates. Also, we anticipated that factory start-up costs would ramp up as we start Colorado design and preconstruction and still expect this to be the case through at least 2024. Longer-term, we’re confident that our GAAP gross margin will begin to normalize as we approach our capacity expansion goals. Now on to our operating expense management. Our operating expenses for the first quarter were $5.9 million, a 6% decrease from the prior year period and flat quarter-over-quarter. This decrease is primarily attributable to a decrease in G&A costs that were offset by investments in R&D and sales. Our GAAP net loss for the first quarter was $9.9 million or a net loss of $0.11 per share with $90 million weighted average number of shares outstanding compared to a net loss of $0.11 per share with 84.6 million weighted average number of shares outstanding in the prior year period. Also, as of March 31, 2024, there were 81 full-time employees, up from 80 in the fourth quarter and 65 in the prior year period with those employees primarily based in our Fremont, California location. Our share-based compensation for the first quarter was $1.2 million compared to $1.1 million in Q4 of 2023 and $0.7 million in the prior year period. As of March 31, 2024, we have 92.3 million shares outstanding. Now turning to the balance sheet. We exited the first quarter with $39 million in cash and no debt. Key drivers of our cash activity for the quarter were $9.8 million used in operating cash flow, $3.1 million used to continue our build-out of our expanded 2-megawatt production line in Fremont, $0.8 million used for progress payments to secure our production thoughts for mechanical, electrical and plumbing equipment; and $8.2 million of cash inflow added primarily through the usage of our ATM. Considering our business achievements and ongoing projects, we believe we are efficiently using capital to drive Amprius forward. Before I turn the call back over to Kang, I would like to take a moment to discuss our outlook for the remainder of the year. We expect to spend another $1 million to $2 million on equipment to support the 2-megawatt line in Fremont. This includes the necessary tools to have our cathode line, up and running by the fourth quarter of this year. As Kang mentioned, we’re also finalizing the design work for our Colorado facility. We expect to publicly communicate a construction cost forecast once the plan is finished. As part of our ongoing strategic planning efforts, we filed a shelf registration on Form S-3 back in October of 2023, and once effective, established a new ATM facility for $100 million. Subsequent to March 31, 2024, and through May 3, we have raised gross proceeds of about $2.1 million through the sale of approximately 1 million shares under the ATM facility. To support our strategic plan, we are pursuing additional funding through multiple vehicles, including equity issuances such as warrant exercises and sales under our ATM and non-dilutive sources such as grants, loans and incentives. With that, I will conclude the financial discussion and pass the call back to Kang.
Kang Sun: Thanks, Sandra. I’d like to reemphasize a few key points before closing. First, Amprius’ silicon anode technology continues to demonstrate the unmatched performance in our industry. Amprius’ battery command a firm-lead with their combination of 50 energy, power, charging time and temperature performance. They are uniquely positioned for the electrical mobility market. Second, Amprius batteries are commercially available today. Our breakthrough technologies are validated by over 800 customer orders. This quarter, we doubled our number of customers who received the shipments. Not only did we have our normal repeat customers, but 52 were new customers, a testament to our robust demand pipeline. We look forward to further building up our customer book in the coming quarters. Third, we are scaling our manufacturing capacity through building our own production capacities and partnering with toll manufacturing partners. With our rent underway in SiMaxx, our design process moving forward in bright and signed partnerships with additional toll manufacturing partners in place. We remain on track to deliver expanded production capacities to fulfill market demand. Finally, we are looking forward to several exciting upcoming milestones over the rest of the year. We expect to fully optimize our SiMaxx next production process and ramp up production to a 2 megawatt hour run rate exiting the year at our three-month capacity — facility. This will represent a tenfold increase in our production levels that we had exiting 2023 and give us additional available products for the strategical customers. We look forward to taking advantage of the hundreds of megawatt hours of new cycle product availability provided by our toll manufacturing agreements to reach more customers and expand our current customer engagement. During the summer, we will deliver the 100 anti-hour EV form factor sell to the US Advanced Battery Consortium, USA BC, as a part of our brand program. We are in the process of finalizing the design plans and are excited to begin the construction of our gigawatt scale facility Brighton, Colorado. As we always prioritize, we will continue to bring to market new and innovative products that push the boundaries of what is possible for our industry. As part of this, we look forward to commercializing our 500 watt-hour per kilo SiMaxx cells later this year. As we look ahead, our strategy and focus on Amprius remains unchanged. We believe that the opportunity in front of Amprius is tremendous, and that our product portfolio positioned us to both grow in the aviation market and expand to other industries, seeking batteries with leading performance. Our addressable markets are growing and durable, including the 1.25-building conformal wearable battery market by 2030, the 33-building aviation battery market by 2030, and the 500-building EV battery market by 2033, all of which are on trade growth path in coming years. 2024 is off to a strong start. We look forward to continuing to deliver what we have planned and promised in the year ahead. Thank you for your continued support of Amprius Technologies. With that, I will turn it back to the operator for the Q&A.
Operator: Thank you. At this time, we’ll open the lines for questions. [Operator Instructions] Our first question is from Colin Rusch with Oppenheimer & Company. Please proceed.
Colin Rusch: Thanks so much. You know, guys, there’s an awful lot of new customers. Can you give us a sense of, what the diversity is from a geographic standpoint and an application standpoint? You mentioned mobility. I’m just curious, if you can give us a sense of, who those folks are and, what sort of sampling they’re doing at this point.
Kang Sun: Yeah, Colin, we have disclosed to some customers. We can disclose. Our customer coverage is quite broad. We primarily in United States and Europe, we also have Asian customers. For example, we have customers in India. Our primary battery application for those customers is still in aviation industry.
Colin Rusch: Excellent. Thanks so much. And then, you know, as you move into working with the contract manufacturer, can you talk a little bit about how you anticipate your, you know, potential scaling of sales? It seems to me that you guys are in a unique position to grow fairly quickly as you get into the balance of the year from a revenue perspective?
Kang Sun: Yeah, we are strengthening our sales team with the introduction of the side core products. We basically resolved the manufacturing capacity issue for that particular product. We have 100 megawatt hour’s capacity behind us, both in cylindrical form and in pouch form. So this gave us tremendous support for our customer development effort here. So the company recently we just added more individuals to our sales force.
Colin Rusch: Thanks so much. And then in Fremont, just the final one from me, can you talk a little bit about the tool qualification and how that’s going? Are the machines and primarily the key machine working as you anticipated as you go through all the testing processes.
Kang Sun: Yes. In Fremont the only machine is measured is the Centotherm machine which produces the Silicon nanowire we — equipment off shelf equipment, just like other people are using in the industry. So recently, the Fremont Centotherm machine started producing silicon and for our batteries. So of course, we still need adjust the production protocol propects of the production protocol making it more efficient. This machine, when we see qualification of the machine, what means the machine can produce quality silicon nano and for our battery
Colin Rusch: Thanks so much guys.
Operator: Our next question is from Donovan Schafer with Northland Capital Markets. Please proceed.
Q – Donovan Schafer: Hi, guys. Thanks for taking the question. So first, I want to also ask about with the customer orders there — with there being so many of the E2 or deliveries to customers. So just to kind of cross the Ts and dot the Is, I just want to confirm, so you say 52 of those were two new customers across the electricity or electric mobility sector. Is there any caveat there? Or can I just take the 82 minus the 52 and just say that you got — you had 30 repeat orders in the quarter. Is that accurate?
Kang Sun: Yes, that’s the right one.
Q – Donovan Schafer: Okay. Great. And then the other part of that is it looks like 76 of those — the shipments were for SiCore. So I guess that raises the question, do you have some repeat customers were they previously did SiMaxx orders and now they’re showing an interest in SiCore. And so, I guess, they had enough interest in SiMaxx, but are also curious to know how this other product potentially works for them. Is that kind of what’s going on there?
Sandra Wallach: Yes.
Kang Sun: So honestly we — we have a customer interest in both products.
Q – Donovan Schafer: And some of it’s crossing over, it seems like…
Kang Sun: Those product offer, yes, — that’s why…
Q – Donovan Schafer: Okay. Okay. And then I saw in the letter to investors that the initial production in Colorado, you switched to that, that will be for SiCore now instead of SiMaxx. And you say that, that’s in response to kind of customer interest. But what I’m curious is, can you give us anything more in terms of like what are the specific attributes about SiCore versus SiMaxx that’s causing that interest? And also, is there a difference in manufacturing costs, that’s an impact there or one is less expensive to manufacture versus the other?
Kang Sun: Yes. One of the reasons we have a tremendous interest for SiCore, because we have more SiCore for customers today, we have a large production capacity behind us, so we can serve a lot more customers. The more customers we serve has more interest to come to us. So that’s the reason we look at the momentum we built up here with we probably need due to the cycle first because those customers a better time will we finish our factory, we will have very significant inquiries from our customers.
Q – Donovan Schafer: Okay. And actually — so you’ve got — it’s the fact that you can have these conversations around SiCore, where you’ve got the tolling arrangements in place already with some manufacturers. So, you — that creates more of an interest with the potential customer because, okay, wasn’t ready to provide volume. And then you might as well bring that manufacturing in-house over time. So, then I guess the question there is how long — when should we start to expect to maybe see that tolling partnership that you’ve kind of buttoned up with one manufacturer. Do you have any sense around when that could start turning into some kind of a revenue around the SiCore product at a scale, even though it’s sort of through tolling?
Kang Sun: Yes, we already have — you can see we have so many customer engagements now, right? So though we believe this year, part of those customers will start some of those customers still in the qualification stage. Not every customer give big orders, but since we have so many customers, we have over 80 customers. We expect section of the customer will place decent orders this year.
Q – Donovan Schafer: Okay. And I think that makes sense in terms of sequence that they’re going to be incrementally more interested in taking SiCore, qualifying it and figuring out if they can incorporate that into their offering at scale. But to get — to show that interest and go through that qualification process once you’ve validated or had handshakes and contracts and so forth signed to people so you can back it up and say, okay, once you place an order, we’re ready to go. Okay. Sorry, just thinking that out loud. I’ll take the rest of your questions offline. Thank you, guys.
Operator: Our next question is from Jed Dorsheimer with William Blair. Please proceed.
Mark Shooter: This is Mark Shooter on for Jed Dorsheimer. Kang, a question on the 76 customers, say they all come to fruition. And I know you have 100 megawatts in the toll coaters, but is there a scenario in which you’ll have to restrict allocation to a certain number of customers?
Kang Sun: We have — Mark, we have a tremendous capacity be had for SiCore — for SiCore customers, I would say, in 2024, maybe even 2025, we should not have supply issues.
Mark Shooter: Understood. Okay. And do you see any of those potential customers, is there any restriction on converting to PO based on where the material is coming from? I’m thinking, okay, I’d like to miss a deal if you there waiting for U.S. domestic production. Is that a factor rule in your–
Kang Sun: Yes, the customer engaged, they shouldn’t have that problem. The customer who has — the customers who have concerns would not engage with us for tool manufacturing model.
Mark Shooter: Understood. Okay. Thank you. And lastly here, congrats on the award with the military. Can you give any color on the unit volumes we should be expecting or ASPs or margin, any color of how we should be modeling that?
Kang Sun: Yeah, Sandra, let you address this.
Sandra Wallach: So that is a larger order that is scheduled to go out this year, but we haven’t given guidance on pricing and margins on that.
Mark Shooter: Okay. Understood. Thank you.
Operator: Our next question is from Chris Souther with B. Riley Securities. Please proceed.
Chris Souther: Hey, guys. Thanks for taking my question. So about six months ago we were talking about customer commitments of tens of megawatt hours and indications of hundreds of megawatt hours for SiMaxx. Are most of those commitments for customers that can switch over to SiCore, at least in the interim, if that’s the first line you’re going to have up and running and maybe even utilize some of the tool manufacturing in the interim? Or can you help kind of understand, like, what the customer evolution is a little bit better as far as switching over to this newer product just because you’re going to have a lot more capacity quicker for that product?
Kang Sun: Yeah. The customer, Chris, customers who are interested in SiMaxx, they would not easily shift to the SiCore because as you know, we sold out our 2024 capacity for SiMaxx. The demand for SiMaxx is still very strong. So the customer wants to have a SiMaxx product for reasons. SiMaxx not only offers super high energy density, also offers very high power capability. We have a customer interest in both products, but I have not seen a customer willing to compromise, say since the SiMaxx is not readily available, I’m going to use the SiCore.
Chris Souther: Okay. So what are the conversations like as far as those customers who were expecting, like, the first line to be in Colorado to be SiMaxx and now it might be a little bit further that they’d have to wait? Is that going to impact any product launches with some of the key customers you talked about previously? Or how do you kind of address that in the interim? I’m curious.
Kang Sun: At this time, our design likes to have a first line for SiCore. That doesn’t mean we have to wait for two or three years to build a SiMaxx. So the SiMaxx, at the year end we have a full manufacturing protocol for SiMaxx validate at Fremont with this two megawatt facility. So we are ready to go larger scale. So now our plan is we design this factory not only for SiCore, also for SiMaxx. We just procure our first line and production line for SiCore.
Chris Souther: Okay. And then can you quantify in any way beyond the customer numbers being impressively quick to grow here? How commitments and indications are for SiCore, that you’re kind of clarifying that one for the first line? And are there significant expectations of CapEx savings for that initial line for SiCore versus SiMaxx?
Kang Sun: Yes. SiCore line, of course, is based on our estimate SiCore line is relatively lower cost, okay? This is a off-shelf production line, right? So is a proven manufacturing process. Currently, we are using Pro manufacturing partner part to do for us. We know exactly how the process looks like we should have the machine configuration is.
Operator: [Operator Instructions] Our next question is from Jeff Grampp with Alliance Global Partners (NYSE:). Please proceed.
Jeff Grampp: Afternoon. Curious going back to the customer count that you guys had in the quarter. Curious if you guys have kind of a percentage of rough numbers that are taking both SiCore and SiMaxx, and wondering if you have a sense or any insight as to the ones that maybe are taking both, is that to maybe assess a better fit within a specific use case? Or might there be customers that could be ultimately be customers of both products for different use cases. Any insight there?
Kang Sun: As we mentioned in our call, quarter, a primary driver of our revenue. Last quarter, actually, we have almost — the people purchase equal amount SiMaxx and SiCore. But we have a lot more new customers for SiCore products because we have capacity available to them. If we have had more capacity for SiMaxx, we will have a lot of more SiMaxx customers as well.
Jeff Grampp: Understood. That’s helpful. And for my follow-up, maybe for Sandra. Any rough numbers or time line in terms of when you guys might have a final number to share publicly on the cost of Colorado? Is that something that’s months away at year-end or just any kind of benchmark to kind of think about here without holding it to too tight of the time line?
Sandra Wallach: Yes. So we’ve completed the 30% construction drawings. We believe we’ll have the 100% construction drawings at the end of the summer. That will allow us to get a more high confidence cost estimate as well as the schedule. And so I think we should be able to give some sort of guidance in exiting the third quarter.
Jeff Grampp: Great. Look forward to. Thank you.
Sandra Wallach: Thank you.
Operator: Our next question is from Amit Dayal with HC Wainwright. Please proceed.
Amit Dayal: Thank you and good afternoon everyone. With respect to sort of this ramp in new customers, how should we think about revenues for 2024, given that you do have the tolling capacity available? Is there anything in the pipeline that could materialize into sort of an order that is larger than everyone is sort of expecting at this point that could move expectations for 2024 higher than where they are.
Kang Sun: So we — as you see, we are very impressive number of customers today. So at this moment, we don’t know which customer can finish their qualification process. We have some customers already placed order for their commercial use. But we have a large reflection of the customer has engaged with us, start purchasing small quantity of the batteries for qualification. I think we may have more clarity. And over that, in Q2, later part of Q2, which customers can start offering our larger orders.
Amit Dayal: Okay, understood. And then the $2.3 million in sales for 1Q, was it all SiMaxx. If you could just maybe give color on what the mix was between SiMaxx and SiCore?
Sandra Wallach: Yes, great question. So, it was roughly 50-50 between the 2.
Amit Dayal: Okay. And the SiMaxx was coming…
Sandra Wallach: No, it’s a little bit — I’m sorry, it’s a little bit more — an answer too fast. It’s about $1 million in SiMaxx and about $1.3 million in SiCore.
Amit Dayal: Okay. And SiMaxx all came from Fremont?
Sandra Wallach: Yes. Okay. That’s all I have guys. I’ll take my other questions offline. Thank you.
Operator: At this time, this concludes our question-and-answer session. If you have any additional questions, you may contact Amprius’s Investor Relations team at [email protected]. I would now like to turn the call over to Dr. Sun for his closing remarks.
Kang Sun: Thanks again, everyone, for joining us today. As a reminder, you may learn more about our company from on the additional updates and learn about upcoming events and presentations from the Investor Relations section of our website. We hope to see you at our upcoming investor conferences and will continue to update you on the exciting progress we are making in both Fremont and Colorado. Finally, I’d like to thank our employees, partners and shareholders for their continued support. Operator?
Operator: This will conclude today’s conference. You may disconnect your lines at this time and thank you for your participation.
This article was generated with the support of AI and reviewed by an editor. For more information see our T&C.